libradius - RADIUS client library
Before issuing any RADIUS requests, the library must be made aware
of the servers it can contact.
The easiest way to configure the
library is to call
causes the library to read a configuration file whose format is described in radius.conf5. The pathname of the configuration file is passed as the Fa file argument to rad_config (.);
This argument may also be given as NULL in which case the standard configuration file /etc/radius.conf is used. rad_config ();
returns 0 on success, or -1 if an error occurs.
The library can also be configured programmatically by calls to
The Fa host parameter specifies the server host, either as a fully qualified domain name or as a dotted-quad IP address in text form. The Fa port parameter specifies the UDP port to contact on the server. If Fa port is given as 0, the library looks up the `radius/udp' or `radacct/udp' service in the network services(5) database, and uses the port found there. If no entry is found, the library uses the standard RADIUS ports, 1812 for authentication and 1813 for accounting. The shared secret for the server host is passed to the Fa secret parameter. It may be any NUL -terminated string of bytes. The RADIUS protocol ignores all but the leading 128 bytes of the shared secret. The timeout for receiving replies from the server is passed to the Fa timeout parameter, in units of seconds. The maximum number of repeated requests to make before giving up is passed into the Fa max_tries parameter. rad_add_server ();
returns 0 on success, or -1 if an error occurs.
may be called multiple times, and it may be used together with rad_config (.);
At most 10 servers may be specified. When multiple servers are given, they are tried in round-robin fashion until a valid response is received, or until each server's Fa max_tries limit has been reached.
After the request has been created with
attributes can be attached to it. This is done through calls to rad_put_addr (,);
and rad_put_string (.);
Each accepts a Fa type parameter identifying the attribute, and a value which may be an Internet address, an integer, or a NUL -terminated string, respectively. Alternatively, rad_put_vendor_addr (,);
or rad_put_vendor_string ();
may be used to specify vendor specific attributes. Vendor specific definitions may be found in #include <radlib_vs.h>
The library also provides a function
which can be used to supply a raw, uninterpreted attribute. The Fa data argument points to an array of bytes, and the Fa len argument specifies its length.
It is possible adding the Message-Authenticator to the request.
This is an HMAC-MD5 hash of the entire Access-Request packet (see RFC 3579).
This attribute must be present in any packet that includes an EAP-Message
It can be added by using the
function. The library calculates the HMAC-MD5 hash implicitly before sending the request. If the Message-Authenticator was found inside the response packet, then the packet is silently dropped, if the validation failed. In order to get this feature, the library should be compiled with OpenSSL support.
functions return 0 on success, or -1 if an error occurs.
function sends the request and waits for a valid reply, retrying the defined servers in round-robin fashion as necessary. If a valid response is received, rad_send_request ();
returns the RADIUS code which specifies the type of the response. This will typically be RAD_ACCESS_ACCEPT RAD_ACCESS_REJECT or RAD_ACCESS_CHALLENGE If no valid response is received, rad_send_request ();
As an alternative, if you do not wish to block waiting for a response,
and rad_continue_send_request ();
may be used instead. If a reply is received from the RADIUS server or a timeout occurs, these functions return a value as described for rad_send_request (.);
Otherwise, a value of zero is returned and the values pointed to by Fa fd and Fa tv are set to the descriptor and timeout that should be passed to select(2).
must be called first, followed by repeated calls to rad_continue_send_request ();
as long as a return value of zero is given. Between each call, the application should call select(2), passing Fa *fd as a read descriptor and timing out after the interval specified by Fa tv . When select(2) returns, rad_continue_send_request ();
should be called with Fa selected set to a non-zero value if select(2) indicated that the descriptor is readable.
Like RADIUS requests, each response may contain zero or more
After a response has been received successfully by
or rad_continue_send_request (,);
its attributes can be extracted one by one using rad_get_attr (.);
Each time rad_get_attr ();
is called, it gets the next attribute from the current response, and stores a pointer to the data and the length of the data via the reference parameters Fa data and Fa len , respectively. Note that the data resides in the response itself, and must not be modified. A successful call to rad_get_attr ();
returns the RADIUS attribute type. If no more attributes remain in the current response, rad_get_attr ();
returns 0. If an error such as a malformed attribute is detected, -1 is returned.
returns RAD_VENDOR_SPECIFIC rad_get_vendor_attr ();
may be called to determine the vendor. The vendor specific RADIUS attribute type is returned. The reference parameters Fa data and Fa len (as returned from rad_get_attr ());
are passed to rad_get_vendor_attr (,);
and are adjusted to point to the vendor specific attribute data.
The common types of attributes can be decoded using
and rad_cvt_string (.);
These functions accept a pointer to the attribute data, which should have been obtained using rad_get_attr ();
and optionally rad_get_vendor_attr (.);
In the case of rad_cvt_string (,);
the length Fa len must also be given. These functions interpret the attribute as an Internet address, an integer, or a string, respectively, and return its value. rad_cvt_string ();
returns its value as a NUL -terminated string in dynamically allocated memory. The application should free the string using free(3) when it is no longer needed.
If insufficient virtual memory is available,
returns NULL rad_cvt_addr ();
and rad_cvt_int ();
function may be used to obtain the Request-Authenticator attribute value associated with the current RADIUS server according to the supplied rad_handle. The target buffer Fa buf of length Fa len must be supplied and should be at least 16 bytes. The return value is the number of bytes written to Fa buf or -1 to indicate that Fa len was not large enough.
returns the secret shared with the current RADIUS server according to the supplied rad_handle.
function demangles attributes containing passwords and MS-CHAPv1 MPPE-Keys. The return value is NULL on failure, or the plaintext attribute. This value should be freed using free(3) when it is no longer needed.
function demangles the send- and recv-keys when using MPPE (see RFC 2548). The return value is NULL on failure, or the plaintext attribute. This value should be freed using free(3) when it is no longer needed.
The following functions return a non- NULL pointer on success. If they are unable to allocate sufficient virtual memory, they return NULL without recording an error message.
The following functions return a non- NULL pointer on success. If they fail, they return NULL with recording an error message.
Закладки на сайте
Проследить за страницей
Created 1996-2023 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру