The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации

5. Let's Go Deeper

Valgrind simulates an Intel x86 processor and runs our test program in this synthetic processor. The two processors are not exactly same. Valgrind is compiled into a shared object, A shell script valgrind sets the LD_PRELOAD environment variable to point to This causes the .so to be loaded as an extra library to any subsequently executed dynamically-linked ELF binary, permitting the program to be debugged.

The dynamic linker calls the initialization function of Valgrind. Then the synthetic CPU takes control from the real CPU. In the memory there may be some other .so files. The dynamic linker calls the initialization function of all such .so files. Now the dynamic linker calls the main of the loaded program. When main returns, the synthetic CPU calls the finalization function of During the execution of the finalization function, summary of all errors detected are printed and memory leaks are checked. Finalization function exits giving back the control from the synthetic CPU to the real one.

5.1. How Valgrind Tracks Validity of Each Byte

For every byte processed, the synthetic processor maintains 9 bits, 8 'V' bits and 1 'A' bit. The 'V' bits indicate the validity of the 8 bits in the byte and the 'A' bit indicates validity of the byte address. These valid-value(V) bits are checked only in two situations:

  1. when data is used for address generation,

  2. when control flow decision is to be made.

In any of these two situations, if the data is found to be undefined an error report will be generated. But no error reports are generated while copying or adding undefined data.

However the case with floating-point data is different. During a floating-point read instruction the 'V' bits corresponding to the data are checked. Thus copying of uninitialized value will produce error in case of floating-point numbers.

#include <stdlib.h>
int main()
        int *p, *a;
        p = malloc(10*sizeof(int));
        a = malloc(10*sizeof(int));
        a[3] = p[3];
        return 0;

/*  produce no errors */

#include <stdlib.h>
int main()
        float *p, *a;
        p = malloc(10*sizeof(float));
        a = malloc(10*sizeof(float));
        a[3] = p[3];
        return 0;

/* produces error */

All bytes that are in memory but not in CPU have an associated valid-address(A) bit, which indicates whether the corresponding memory location is accessible by the program. When a program starts, the 'A' bits corresponding to each global variables are set. When a call malloc, new or any other memory allocating function is made, the 'A' bits corresponding to the allocated bytes are set. Upon freeing the allocated block using free/new/new‘’ the corresponding 'A' bits are cleared. While doing a system call the 'A' bits are changed appropriately.

When values are loaded from memory the 'A' bits corresponding to each bytes are checked by Valgrind, and if the 'A' bit corresponding to a byte is set then its 'V' bits is checked. If the 'V' bits are not set, an error will be generated and the 'V' bits are set to indicate validity. This avoids long chain of errors. If the 'A' bit corresponding to a loaded byte is 0 then its 'V' bits are forced to set, despite the value being invalid.

Have a look on the following program. Run it.

#include <stdlib.h>
int main()
        int *p, j;
        p = malloc(5*sizeof(int));
        j = p[5];
        if (p[5] == 1)
                i = p[5]+1;
        return 0;

Here two errors occur. Both of them are due to the accessing address location p + sizeof(int)*5 which is not allocated to the program. During the execution of j = p[5], since the address p + sizeof(int)*5 is invalid, the 'V' bits of 4 bytes starting at location p+sizeof(int)*5 are forced to set. Therefore uninitialized value occurs neither during the execution of j = p[5] nor during the execution of if(p[5]==1).

5.2. Cache Profiling

Modern x86 machines use two levels of caching. These levels are L1 and L2, in which L1 is a split cache that consists of Instruction cache(I1) and Data cache(D1). L2 is a unified cache.

The configuration of a cache means its size, associativity and number of lines. If the data requested by the processor appears in the upper level it is called a hit. If the data is not found in the upper level, the request is called a miss. The lower level in the hierarchy is then accessed to retrieve the block containing requested data. In modern machines L1 is first searched for data/instruction requested by the processor. If it is a hit then that data/instruction is copied to some register in the processor. Otherwise L2 is searched. If it is a hit then data/instruction is copied to L1 and from there it is copied to a register. If the request to L2 also is a miss then main memory has to be accessed.

Valgrind can simulate the cache, meaning it can display the things that occur in the cache when a program is running. For this, first compile your program with -g option as usual. Then use the shell script cachegrind instead of valgrind.

Sample output:

==7436== I1  refs:      12,841
==7436== I1  misses:       238
==7436== L2i misses:       237
==7436== I1  miss rate:   1.85%
==7436== L2i miss rate:   1.84%
==7436== D   refs:       5,914  (4,626 rd + 1,288 wr)
==7436== D1  misses:       357  (  324 rd +    33 wr)
==7436== L2d misses:       352  (  319 rd +    33 wr)
==7436== D1  miss rate:    6.0% (  7.0%   +   2.5%  )
==7436== L2d miss rate:    5.9% (  6.8%   +   2.5%  )
==7436== L2 refs:          595  (  562 rd +    33 wr)
==7436== L2 misses:        589  (  556 rd +    33 wr)
==7436== L2 miss rate:     3.1% (  3.1%   +   2.5%  )

   L2i misses means the number of instruction misses that occur in L2
   L2d misses means the number of data misses that occur in L2 cache.
   Total number of data references = Number of reads + Number of writes.
   Miss rate means fraction of misses that are not found in the upper

The shell script cachegrind also produces a file, cachegrind.out, that contains line-by-line cache profiling information which is not humanly understandable. A program vg_annotate can easily interpret this information. If the shell script vg_annotate is used without any arguments it will read the file cachegrind.out and produce an output which is humanly understandable.

When C, C++ or assembly source programs are passed as input to vg_annotate it displays the number of cache reads, writes, misses etc.

I1 cache:         16384 B, 32 B, 4-way associative
D1 cache:         16384 B, 32 B, 4-way associative
L2 cache:         262144 B, 32 B, 8-way associative
Command:          ./a.out
Events recorded:  Ir I1mr I2mr Dr D1mr D2mr Dw D1mw D2mw
Events shown:     Ir I1mr I2mr Dr D1mr D2mr Dw D1mw D2mw
Event sort order: Ir I1mr I2mr Dr D1mr D2mr Dw D1mw D2mw
Thresholds:       99 0 0 0 0 0 0 0 0
Include dirs:
User annotated:   valg_flo.c
Auto-annotation:  off

User-annotated source: valg_flo.c:

Ir I1mr I2mr Dr D1mr D2mr Dw D1mw D2mw

 .   .   .   .   .    .   .   .    .   #include<stdlib.h>
 .   .   .   .   .    .   .   .    .   int main()
 3   1   1   .   .    .   1   0    0   {
 .   .   .   .   .    .   .   .    .           float *p, *a;
 6   1   1   .   .    .   3   0    0           p = malloc(10*sizeof(float));
 6   0   0   .   .    .   3   0    0           a = malloc(10*sizeof(float));
 6   1   1   3   1    1   1   1    1           a[3] = p[3];
 4   0   0   1   0    0   1   0    0           free(a);
 4   0   0   1   0    0   1   0    0           free(p);
 2   0   0   2   0    0   .   .    .   }

Inferno Solutions
Hosting by

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру