Booting from Hard Drive is not really more difficult that booting from CD. The only thing really important is that your hard drive has to be correctly prepared. Take a look at Section 4.3.3 to learn how to prepare your hard drive.
start the box and enter the BOOT_ADMIN mode. (Section 3.1.1)
There are two options from there═: either you know the full PATH to your hard disk device, then you can jump to next step, or you don't. In this last case, issue a search ipl to list all available devices with IPL. You can also specify a search [PATH]. For instance if you want to search the Single Ended SCSI bus═:
Take a look at help search for details specific to your box.
Once you know the full PATH to your hard drive, you can issue a boot <PATH>. That's all. If everything goes fine, it will start booting the kernel as setup by PALO (see Section 4.3.3). Real life example═:
Закладки на сайте
Проследить за страницей
Created 1996-2023 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру