VGLBitmapAllocateBits VGLBitmapCopy VGLBitmapCreate VGLBitmapDestroy VGLBitmapPutChar VGLBitmapString VGLBlankDisplay VGLBox VGLCheckSwitch VGLClear VGLEllipse VGLEnd VGLFilledBox VGLFilledEllipse VGLGetXY VGLInit VGLLine VGLKeyboardInit VGLKeyboardEnd VGLKeyboardGetCh , VGLMouseInit VGLMouseMode VGLMouseSetImage VGLMouseSetStdImage VGLMouseStatus VGLPanScreen VGLSetBorder VGLSetPalette VGLSetPaletteIndex VGLSetVScreenSize VGLSetXY VGLTextSetFontFile - Video Graphics Library functions
Below is a short description of the various functions:
initialize the library and set up the graphic mode mode
terminate graphic mode, and restore the screenmode that was active before VGLInit ();
if the program goes into longer periods of processing without doing any graphics output, calling this function occasionally will allow the system to switch screens.
instruct the char/string functions to use the font in file filename instead of the builtin font.
set up the keyboard in the ``raw'' I/O mode and specify the key code to be used. code must be VGL_XLATEKEYS VGL_CODEKEYS or VGL_RAWKEYS When VGL_XLATEKEYS is specified, the keyboard translates the raw keyboard scan code into a character code. If VGL_RAWKEYS is used, the raw keyboard scan code is read as is. VGL_CODEKEYS is the intermediate key code; each key is assigned a unique code whereas more than one raw scan code may be generated when a key is pressed.
when you have finished using the keyboard, call this function.
read one byte from the keyboard. As the keyboard I/O is in the ``raw'' input mode, the function will not block even if there is no input data, and returns 0.
initialize the mouse. The optional on-screen mouse pointer is shown if the argument is VGL_MOUSESHOW
either shows the mouse pointer if the argument is VGL_MOUSESHOW or hides the mouse pointer if the argument is VGL_MOUSEHIDE
returns the current mouse pointer coordinates and button state in x , y buttons. The return value reflects if the mouse pointer is currently shown on screen or not.
with this function it is possible to change the image of the mouse pointer on screen.
this function restores the mouse pointer to the standard arrow.
retrieves the color of the pixel located at x , y coordinates of the object argument, and returns it as a byte value.
sets the color of the pixel located at x , y coordinates of the object argument to color byte value.
draw a line from x1 , y1 to x2 , y2 in color color
draw a box with upper left hand corner at x1 , y1 and lower right hand corner at x2 , y2 in color color
draw a filled (solid) box with upper left hand corner at x1 , y1 and lower right hand corner at x2 , y2 in color color
draw an ellipse centered at xc , yc make it a pixels wide, and b pixels high in color color
draw a filled (solid) ellipse centered at xc , yc make it a pixels wide, and b pixels high in color color
create a bitmap object and initialize it with the specified values and bit data. type must be MEMBUF for the in-memory bitmap. bits may be NULL so that bitmap data may be associated later.
There also is a macro,
VGLBITMAP_INITIALIZER (type xsize ysize bits);
to initialize a statically declared bitmap object.
free the bitmap data and the bitmap object.
allocate a bit data buffer for the specified object.
copy a rectangle of pixels from bitmap src upper left hand corner at srcx , srcy to bitmap dst at dstx , dsty of the size width , height
write the character ch at position x , y in foreground color fgcol If fill is != 0, use the color bgcol as background otherwise the background is transparent. The character is drawn in the direction specified by the argument dir
write the string str at position x , y in foreground color fgcol If fill is != 0, use the color bgcol as background otherwise the background is transparent. The string is drawn in the direction specified by the argument dir
clears the entire bitmap to color color
this function sets the palette used, the arguments red , green , blue should point to byte arrays of 256 positions each.
set the palette index color to the specified RGB value.
set the border color to color color
change the virtual screen size of the display. Note that this function must be called when our vty is in the foreground. And object must be VGLDisplay Passing an in-memory bitmap to this function results in error.
The desired virtual screen width may not be achievable because of the video card hardware. In such case the video driver (and underlaying video BIOS) may choose the next largest values. Always examine object->VXsize and VYsize after calling this function, in order to see how the virtual screen is actually set up.
In order to set up the largest possible virtual screen, you may call this function with arbitrary large values.
change the origin of the displayed screen in the virtual screen. Note that this function must be called when our vty is in the foreground. object must be VGLDisplay Passing an in-memory bitmap to this function results in error.
blank the display if the argument blank 0. This can be done to shut off the screen during display updates that the user should first see when it is done.
The recommended way to handle signals and program termination is to
have a flag to indicate signal's delivery.
Your signal handlers set this flag but do not terminate
the program immediately.
The main part of the program checks the flag to see if it is
supposed to terminate, and calls
and exit(3) if the flag is set.
installs its internal signal handlers for SIGINT , SIGTERM , SIGSEGV and SIGBUS and terminates the program at appropriate time, after one of these signals is caught. If you want to have your own signal handlers for these signals, install handlers after VGLInit (.);
SIGUSR1 and SIGUSR2 are internally used by libvgl to control screen switching and the mouse pointer, and are not available to libvgl client programs.
Закладки на сайте
Проследить за страницей
Created 1996-2023 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру